|
|
|
Microdrive MD Series |
|
MODEL: MD05P, MD10P, MD20P,
MD50P, MD80P, MD100P, MD200P, MD400P, MD800P |
 |
The MD-P Series is supplied in the same housing as the RS
Transducer controlled screwdrivers. However, these tools do not
include the internal rotary transducer that the RS series does.
Torque is controlled by monitoring the current load on the motor the
same as it is for all MD series tool. Unlike the MDL Series the
encoder is located directly on the shaft of the motor as it is on the RS
series tools, providing the highest possible accuracy of angle control.
These tools are a direct alternative for the more expensive RS
transducer controlled tools. At nearly half the price they can be
good alternative to consider when your budget it tight.
You do give up quite a bit of quality control however, due to the
lower repeatability spec and testing should be done before deploying
these tools for thread cutting or forming applications.
Specifications:
- Torque repeatability
is normally 5% but it is dependent on RPM and joint type.
- Angle control is .5%
degrees. |
|
Application Videos --> |
 |
|
OPTIONS |
LINKS |
|
Vacuum adapters |
G4
Controller |
|
Auto screw feeding |
Paramizer
Software |
|
Pneumatic Z-Slide mounting assemblies |
|
|
Spring-balance adapters |
|
|
Custom multi-spindle assemblies |
|
|
Device holders and torque reaction arms |
|
|
Complete automated systems |
|
|
|
|
|
Model
|
Torque
Range
(in.
lbs)
|
Speed
(rpm)
|
Rotary
Encoder
|
Bit
Interface
|
weight
ca. kg
|
|
MD05-P
|
.13 - .44 |
350-700
|
Yes
|
 3 mm
|
0.1
|
|
MD10-P
|
.26 - .88 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD20-P
|
.44 - 1.7 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD50-P
|
1.3
- 4.4 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD80-P
|
1.1
- 7.0 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD100-P
|
2.2
- 8.8 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD200-P
|
4.4
- 17.7 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD400-P
|
13.2
- 35.4 |
350-700
|
Yes
|
3 mm
|
0.1
|
|
MD800-P
|
.88
- 88 |
300-800
|
Yes
|
3 mm
|
0.2
|
|
|
|
